BIS Registration for electronic control gear is important for manufacturers who make electronic control gear used with LED modules in India. Electronic control gear helps control the power supplied to LED modules and allows them to work properly and safely.

BIS includes DC or AC Supplied Electronic Control Gear for LED Modules under its Compulsory Registration Scheme (CRS). The applicable standard is IS 15885 (Part 2/Sec 13):2012, which covers safety requirements for electronic control gear used with LED modules.

What Is Electronic Control Gear?

Electronic control gear is an electrical device used with LED modules. It helps control the electrical power supplied to the LED module.

It can be used in different LED lighting products and systems. Good-quality control gear is important because it helps the lighting product work safely and properly.

Electronic control gear covered by the standard can work with DC supplies up to 1,000 V and AC supplies up to 1,000 V at 50 Hz, subject to the conditions given in the standard.

BIS Registration for Electronic Control Gear

BIS Registration for electronic control gear is required for products covered under the applicable compulsory registration requirements.

BIS currently lists DC or AC Supplied Electronic Control Gear for LED Modules under Scheme-II. The applicable standard listed by BIS is IS 15885 (Part 2/Sec 13).

Manufacturers need to meet the required safety requirements and complete the applicable testing and registration process.

BIS Standard for Electronic Control Gear

The main standard is:

IS 15885 (Part 2/Sec 13):2012 – Safety of Lamp Control Gear, Part 2: Particular Requirements, Section 13: d.c. or a.c. Supplied Electronic Control Gear for LED Modules.

This standard gives safety requirements for electronic control gear used with LED modules.

It covers areas such as:

• Marking
• Protection against accidental contact
• Protective earthing
• Moisture resistance
• Insulation
• Electric strength
• Transformer heating
• Resistance to heat
• Creepage and clearance distances
• Resistance to corrosion

These requirements help reduce electrical, thermal, and other safety risks.

CRS Certification for Electronic Control Gear

CRS Certification for electronic control gear means following the BIS Compulsory Registration Scheme requirements applicable to this product.

BIS lists electronic control gear for LED modules under Scheme-II. The registration process is based on product testing and conformity with the applicable Indian Standard.

Manufacturers should check the latest BIS requirements before starting the process because standards and government notifications can be updated.

BIS Notification for Electronic Control Gear

The BIS notification for electronic control gear is important for manufacturers because it explains the requirements applicable to the product.

Electronic control gear for LED modules was included in the government framework for electronic and IT products under the compulsory registration requirements. The BIS current Scheme-II list also shows the product under IS 15885 (Part 2/Sec 13).

Manufacturers should always check the latest BIS notification and amendments before submitting an application.

BIS License for Electronic Control Gear

BIS License for electronic control gear is a commonly searched term. However, electronic control gear for LED modules is listed under the Compulsory Registration Scheme (CRS).

Therefore, manufacturers should first confirm the applicable BIS scheme before applying. Under CRS, the process is generally referred to as BIS Registration rather than the traditional BIS licence process used for some other products.

BIS Registration Process for Electronic Control Gear

The general process can include these steps:

1. Check the applicable standard
   Confirm that the product comes under the applicable BIS requirements.
2. Prepare product details
   Keep information about the model, voltage, current, power, design, and other technical details ready.
3. Arrange product samples
   Prepare the samples required for testing.
4. Complete product testing
   Get the electronic control gear tested through an applicable BIS-recognized laboratory.
5. Prepare documents
   Collect company, factory, product, and technical documents.
6. Submit the application
   Submit the required BIS CRS application and documents.
7. BIS review
   BIS checks the application and supporting information.
8. Answer queries
   Provide additional information if BIS asks for it.
9. Complete registration
   After meeting the applicable requirements, BIS registration can be granted.

The exact process can depend on the product, manufacturer, test results, and current BIS requirements.

Testing Requirements for Electronic Control Gear

Testing is an important part of BIS registration.

The testing checks whether the electronic control gear meets the safety requirements of the applicable standard.

Some important testing areas include:

• Marking
• Protection against electric shock
• Earthing
• Moisture resistance
• Insulation
• Electric strength
• Heat testing
• Creepage and clearance
• Corrosion resistance
• Construction requirements

BIS's standard for electronic control gear specifically includes these types of safety checks.

The exact tests required can depend on the product and its design.

Documents Required for BIS Registration

The required documents can be different for each manufacturer. Some common documents may include:

• Company details
• Manufacturer details
• Factory information
• Product specifications
• Product photographs
• Technical drawings
• Circuit diagrams
• Manufacturing process details
• Test reports
• Component details
• Quality-control documents
• User manual
• Brand and model information
• Required declarations and forms

Preparing the documents correctly can help reduce mistakes and delays.

BIS Consultant for Electronic Control Gear

A BIS Consultant for electronic control gear can help manufacturers understand the certification requirements and complete the registration process.

A consultant can help with:

• Checking the applicable BIS standard
• Understanding BIS requirements
• Preparing and checking documents
• Coordinating product testing
• Reviewing test reports
• Preparing the application
• Supporting application submission
• Responding to BIS queries
• Providing guidance during the registration process

CRS Consultant for Electronic Control Gear

A CRS Consultant for electronic control gear can help manufacturers understand the Compulsory Registration Scheme and the requirements for their product.

The consultant can provide support with:

• Product testing
• Technical documents
• Application preparation
• Test report checking
• BIS communication
• Registration support

Before starting the process, manufacturers should confirm the latest applicable standard and BIS requirements.

BIS Agent for Electronic Control Gear

A BIS Agent for electronic control gear can help manufacturers with documentation, testing coordination, application work, and communication during the registration process.

However, a private agent or consultant does not issue BIS registration.

The registration is granted by BIS after the manufacturer and product meet the applicable requirements.

Benefits of BIS Registration

BIS registration can provide several benefits to manufacturers:

• Helps meet applicable Indian requirements
• Shows that the product follows the required standard
• Improves customer confidence
• Supports product safety
• Helps maintain better quality control
• Supports legal supply of covered products
• Makes compliance easier to manage

For manufacturers supplying electronic control gear for LED modules in India, understanding the BIS requirements is an important step.

Why Choose EVTL India?

EVTL India helps manufacturers understand BIS and CRS requirements in a simple and clear way. The team supports manufacturers with the different steps involved in the registration process.

Manufacturers can get support for:

• Checking applicable BIS requirements
• Preparing and checking documents
• Coordinating product testing
• Reviewing test reports
• Preparing the application
• Supporting BIS communication
• Providing guidance throughout the registration process

Conclusion

EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licences hassle-free.

Electronic control gear is an important part of many LED lighting systems, so its safety and quality are important. BIS lists DC or AC Supplied Electronic Control Gear for LED Modules under the Compulsory Registration Scheme with IS 15885 (Part 2/Sec 13):2012 as the applicable standard.

Manufacturers may need to complete product testing, prepare documents, submit the application, and meet other BIS requirements. Checking the latest BIS notifications and requirements before starting the process can help avoid mistakes and delays.

With the right support, manufacturers can understand the certification requirements more easily and complete the registration process smoothly.

Contact EVTL India

📞 +91 9560935898
📧 contact@evtlindia.com
🌐 www.evtlindia.com

Frequently Asked Questions

1. What is BIS Registration for electronic control gear?

BIS Registration is the process of meeting the applicable BIS requirements and completing the required registration process for electronic control gear covered under the compulsory registration scheme.

2. What is the BIS standard for electronic control gear?

The applicable standard is IS 15885 (Part 2/Sec 13):2012 for DC or AC supplied electronic control gear for LED modules.

3. Is CRS Certification required for electronic control gear?

Electronic control gear for LED modules is listed by BIS under the Compulsory Registration Scheme. Manufacturers should check the latest requirements before applying.

4. Is product testing required?

Yes. Testing is an important part of checking whether the electronic control gear meets the requirements of the applicable Indian Standard.

5. Can a BIS Consultant help with electronic control gear registration?

Yes. A BIS Consultant can help with documents, product testing, application preparation, test reports, and communication during the registration process.

6. How can I get BIS Registration for electronic control gear?

The manufacturer should first confirm the applicable BIS requirements, prepare the product and company documents, complete the required testing, submit the application, and complete the remaining BIS requirements.