Introduction

India’s furniture industry is expanding rapidly, and bunk beds are widely used in homes, hostels, schools, PG accommodations, and dormitories. Since bunk beds are directly associated with user safety—especially for children and students—the Government of India has made BIS Certification for Bunk Beds mandatory.

Without a valid BIS Certificate, bunk beds cannot be manufactured, imported, sold, or distributed in India. Common risks related to bunk beds include falls from height, ladder failure, entrapment hazards, and structural collapse. To minimize these risks, the Bureau of Indian Standards (BIS) has implemented strict safety regulations under the BIS certification system.

What is BIS Certification?

BIS Certification is a quality and safety assurance system operated by the Bureau of Indian Standards. Its objective is to ensure that products sold in India comply with relevant Indian Standards for safety, performance, and durability.

After obtaining a BIS Certificate, manufacturers are legally permitted to use the ISI Mark on their products. The ISI Mark is a government-approved symbol that assures consumers of product quality and regulatory compliance.

Applicable BIS Standard for Bunk Beds

The mandatory Indian Standard for bunk beds is:

IS 17636:2022 – Bunk Beds: Safety Requirements

This standard specifies requirements related to:

• Structural strength and stability
  
  

• Guardrails and fall protection
  
  

• Entrapment hazard prevention
  
  

• Load-bearing capacity
  
  

• Ladder safety and design
  
  

• Material quality and durability
  
  

• Edge safety and surface finish
  
  

• Impact resistance and performance
  
  

Any bunk bed sold in India must comply with IS 17636:2022 and obtain BIS Standard for Bunk Beds entry.

Why BIS Certification for Bunk Beds is Mandatory

Bunk beds are primarily used by children and young adults, so safety cannot be compromised. BIS Certification is mandatory to ensure:

• Reduced risk of structural collapse
  
  

• Protection against falls from the upper bunk
  
  

• Prevention of entrapment and ladder-related injuries
  
  

• Control over unsafe materials and finishes
  
  

• Enhanced consumer safety
  
  

• Legal compliance with Indian regulations
  
  

Selling bunk beds without BIS Certification is a punishable offence in India.

BIS Certification Process for Bunk Beds (IS 17636:2022)

The BIS certification process includes the following steps:

1. Identify the applicable standard – IS 17636:2022
   
   

2. Submit an online application through the BIS Manak Portal
   
   

3. Pay the prescribed BIS certification fees
   
   

4. Product sample testing at a BIS-recognized laboratory
   
   

5. Factory inspection by BIS officials
   
   

6. Grant of BIS License
   
   

7. Permission to use the ISI Mark on bunk beds
   
   

8. Ongoing surveillance and license renewal
   
   

BIS FMCS Scheme for Foreign Manufacturers

Foreign manufacturers who wish to export bunk beds to India must apply under the BIS FMCS Scheme (Foreign Manufacturers Certification Scheme).

Under this scheme, overseas manufacturers must obtain:

• BIS FMCS License – Legal authorization to manufacture and export certified bunk beds to India
  
  

• BIS FMCS Certificate – Official confirmation that the product complies with Indian Standards
  
  

Without a valid BIS FMCS License, foreign-made bunk beds cannot be imported or sold in the Indian market.

Testing Requirements for BIS Certification of Bunk Beds

As per IS 17636:2022, the following tests are mandatory:

• Structural load test
  
  

• Stability test
  
  

• Guardrail strength test
  
  

• Impact resistance test
  
  

• Entrapment hazard test
  
  

• Ladder strength and angle test
  
  

• Edge sharpness test
  
  

• Durability and performance test
  
  

All testing must be conducted only at  BIS License for Bunk Beds

  Scope of BIS License for Bunk Beds

Covered Products

• Domestic and non-domestic bunk beds
  
  

• Ready-to-assemble and fully fabricated bunk beds
  
  

• Beds with a base height of 800 mm or more
  
  

Excluded Products

• Medical and specialty beds
  
  

Documents Required for BIS Certificate Registration for Bunk Beds

Manufacturer Documents

• Factory license or registration
  
  

• Manufacturing process flow chart
  
  

• Machinery and testing equipment list
  
  

• Calibration certificates
  
  

• Factory layout
  
  

Technical Documents

• Product specifications
  
  

• Bill of Materials (BOM)
  
  

• Quality control plan
  
  

• In-house test reports
  
  

Legal Documents

• Address proof and identity proof
  
  

• Brand authorization letter
  
  

• Trademark certificate (if applicable)
  
  

Benefits of BIS Certification for Bunk Beds

• Legal sale across India
  
  

• Increased customer confidence
  
  

• Strong brand reputation
  
  

• Approval for e-commerce platforms
  
  

• Eligibility for government tenders
  
  

• Reduced product liability risks
  
  

• Competitive advantage in the market
  
  

Penalties for Non-Compliance

Selling bunk beds without BIS FMCS Certificate may result in:

• Heavy monetary fines
  
  

• Product seizure
  
  

• Legal prosecution
  
  

• Factory shutdown
  
  

• Market ban in India
  
  

Who Needs BIS Certification for Bunk Beds?

• Indian manufacturers
  
  

• Foreign manufacturers under the BIS FMCS License
  
  

• Importers and exporters
  
  

• Furniture brands
  
  

• OEM / ODM suppliers
  
  

• Online sellers
  
  

Each manufacturing unit must obtain a separate BIS License or BIS FMCS License.

Conclusion

The BIS Certificate for Bunk Beds under IS 17636:2022 is a mandatory legal requirement in India. It ensures that bunk beds meet strict safety, strength, and quality standards.

For Indian manufacturers, BIS Certification is essential for lawful manufacturing and sale. For foreign manufacturers, compliance under the BIS FMCS Scheme through a BIS FMCS License and BIS FMCS Certificate is compulsory to enter the Indian market.

URL :- https://bis-certifications.com/blogs/isi-products/bunk-beds-is-17636